Newton Abbot

Newton Abbot

This customer was undertaking a substantial renovation, converting two houses into one.                 We installed the Klover Smart 120 in cream and 2 x solar thermal panels to run all the heating and hot water needs for the house.             We also installed the...
Exeter

Exeter

We removed a solid fuel Rayburn and replaced it with a Klover Smart 120. This now gives the customer a fully controllable heating system. Some of the difficulties with the solid fuel appliance is that it must be lit every day and there is a lot of ash to clear up....
Crediton

Crediton

For this customer we replaced an Aga with a red Klover Smart 120, a solar hot water cylinder and radiators and towel rails throughout. As the space was not quite as big as needed for access to maintain the stove we installed an alcove kit which is a rail system that...
Ecompact 250 Install backed up by 3 Phase Solar PV

Ecompact 250 Install backed up by 3 Phase Solar PV

This customer already had a large solar PV array supplying some power to the house across 3 phases. We have installed a Klover Ecompact 250 to provide heating and to heat the water for when their is not enough sun, for example during the winter. However, through the...
Chapmans Well

Chapmans Well

We were asked to replace an old oil boiler, for a new and efficient Klover Ecompact 250. This system simply replaced the old boiler so was added into the heating system, without much other work to the central heating system. This allowed the customer to have cheap and...